TECHNICAL RESOURCES
Technical Information for Product Selection and Project Planning
Use this hub to locate published product specifications, technical parameters and product-specific reference standards, and to prepare the information required for technical and procurement review.
RESOURCE CATEGORIES
Start with the Information Your Review Requires
Navigate by product, review each product’s referenced standards, or prepare the application and procurement information needed for a focused technical discussion.
Product Specifications & Technical Parameters
Open the relevant product page for available dimensions, structures and published performance information.
View product information → 02Standards Referenced by Product
Review standards in the specific product or grade context in which they are presented.
Review standard mapping → 03Selection & Technical Support
Prepare application, specification and procurement inputs for product and documentation review.
Prepare your inquiry →PRODUCT INFORMATION
Specifications and Technical Parameters by Product
Each entry leads to the current product page, keeping dimensions, configurations and technical parameters within the correct product boundary.
Geomembranes
HDPE Geomembrane
Grade and dimensional information, GH-2S technical parameters, selection considerations and inquiry preparation.
View technical information →Textured HDPE Geomembrane
Surface forms, dimensional ranges, published performance requirements and selection considerations.
View technical information →Composite Geomembrane
Configurations, dimensions, performance parameters, hydrostatic-pressure requirements and selection guidance.
View technical information →Geotextiles
Staple Fiber Geotextile
Availability, dimensions, performance classes, common indicators and selection considerations.
View technical information →Filament Geotextile
Availability, dimensions, performance classes, common indicators and selection considerations.
View technical information →Reinforcement & Drainage
Geogrid
Plastic, steel-plastic and fiberglass categories, material and process context, and product-mapped reference standards.
View technical information →Composite Drainage Geonet
Three-layer structure, dimensions, published technical parameters and selection considerations.
View technical information →REFERENCE STANDARDS
Standards Referenced by Product
The references below remain tied to the stated product or grade. They are provided to support product-specific technical review, not as company certifications or universal standards for the full portfolio.
HDPE Geomembrane
- GB/T 17643-2011
- GH-1: JT/T 518-2004
- GH-2S: CJ/T 234-2006
Textured HDPE Geomembrane
- GB/T 17643-2011
- CJ/T 234-2006
Composite Geomembrane
- GB/T 17642-2008
Staple Fiber Geotextile
- GB/T 17638-2017
- JT/T 520-2004
Filament Geotextile
- GB/T 17639-2008
- JT/T 519-2004
Geogrid
- Plastic: GB/T 17689-2008
- Steel-Plastic: JT/T 925.1-2014
- Fiberglass: GB/T 21825-2008
Composite Drainage Geonet
- CJ/T 452-2014
Scope note: Reference standards are not certificates. Final applicable standards, performance requirements and acceptance criteria should be confirmed against the project specification and contract.
PRODUCT SELECTION GUIDANCE
Prepare a Clear Technical Inquiry
Product selection should be discussed against the application conditions, required engineering functions and project requirements. The following inputs help focus the review.
- 01
Application and engineering function
Describe the operating environment and the containment, separation, drainage, filtration, protection or reinforcement function required.
- 02
Product family or configuration
Identify the material family, surface form, structure or product category under review where known.
- 03
Dimensions and performance requirements
Provide the required thickness, width, areal mass, performance class or other specified criteria where applicable.
- 04
Quantity, destination and schedule
Share procurement quantity, delivery destination and timing requirements for supply coordination.
- 05
Project specification and acceptance criteria
Include relevant project clauses, specified reference standards and acceptance requirements.
- 06
Required technical or procurement information
State which information or document types need to be reviewed for the selected product and order.
INSTALLATION & TECHNICAL SUPPORT
Keep Installation Context Connected to Product Review
Technical guidance and product selection can be discussed against the stated engineering requirements. Installation methods and acceptance requirements should remain governed by responsible project documentation.
Installation Context
Share site conditions, adjacent materials, jointing or welding requirements, drawings and the responsible quality plan where relevant.
Technical Review
Discuss published product information, selection inputs and project-specific requirements without treating general guidance as design approval.
TECHNICAL INFORMATION REQUESTS
Confirm Available Technical Documents for Your Requirement
Document availability depends on the selected product, applicable project specification and agreed procurement requirements. Contact SLG with the required document types and revisions so the available information can be reviewed before order confirmation.
Selected product and required specification
Project or procurement reference requirements
Required information or document type
Revision, acceptance and submission needs
FAQ
Using the Technical Resources Hub
A concise guide to locating product information, reading standard references and preparing a technical request.
Where can I find product technical parameters?
Use the seven product entries above to open the relevant product page. Published dimensions, configurations and performance information remain on the product page so data is not mixed across product families.
Are the listed standards SLG certifications?
No. They are product- or grade-specific reference standards presented in the scope shown. Final applicable requirements should be checked against the project specification and contract.
Is this page a technical-document download library?
No. Public download files are not provided here. Contact SLG to identify the selected product, project specification and required document type so the information currently available can be confirmed.
What information should I provide for product selection?
Share the application, engineering function, product family or configuration, required dimensions or performance criteria, quantity, destination, schedule and applicable project requirements.
Can general guidance replace project engineering review?
No. Product information and selection inputs support technical discussion, while final design, installation and acceptance requirements should follow the responsible project documents and contract.
TECHNICAL & PROCUREMENT SUPPORT
Discuss Your Technical and Procurement Requirements
Share the application, product, specification, dimensions, quantity, destination and required technical information for a focused review.